Amphenol FCI Cool Edge Connectors
Amphenol FCI Cool Edge Connectors support board-to-board (BTB) applications in the electronics market. This high-speed and high-power card edge connector system addresses multiple standards such as PCIe, SAS, SATA, Gen 4/5, OCP 3.0, EDSFF, NGSFF/NF1, and Gen Z. In addition, these connectors offer multiple BTB configurations like mezzanine, midplane, backplane, and coplanar. These connectors are designed as open-pin field and hot-plug capable. Amphenol FCI Cool Edge Connectors are ideally suited for solid-state drives (SSDs), NVMe SSDs, enterprise data centers, network interface cards, and add-in card applications.
Features
- Supports data speed from 6Gbps to 25Gbps per differential pair
- Provides 20 to 200 signal pin options for 66 differential pairs
- Supports 85Ω/92Ω/100Ω platforms
- Provides 1.6mm and 2.36mm card gauge
- Supports SAS, SATA PCIe(Gen3/4), XAUI, and more
- Cost-effective interconnect solution to replace pairs of male and female connectors
- TH power and SMT signal terminations
- Multiple BTB configurations
- Addresses multiple standards such as PCIe, SAS, SATA, Gen 4/5, OCP 3.0, EDSFF, NGSFF/NF1, and Gen Z
- Electrical parameters
- 20A to 25A/pin current rating for power pins
- 0.5A to 1.2A/pin current rating for signal pins
Applications
- Datacom
- Servers
- Storage
- High-end computing
- Networking
- Switches
- Routers
- Telecom
- 3G
- LTE networks
- Data centers
Family Chart
Videos
Featured Connectors
Amphenol Commercial Connecteurs E/S Mini Cool Edge
Facteur de forme mince de 0,60 mm, transmet des signaux haut débit jusqu'à 56 G PAM4/PCIe® Gen 4/PCIe Gen 5.
Amphenol FCI Connecteurs à double densité Cool Edge de 0,80 mm
Conception compacte avec deux rangées de contacts et options de broches d'alimentation, asymétriques et différentielles.
Amphenol FCI Slim Cool Edge 0.65mm Connectors
Provides one-piece high speed and high power in a card-edge package, multiple BTB configurations.
Amphenol FCI Mini Cool Edge 0.60mm Connectors
High-density, high-speed connectors for versatile board-to-board applications.
Amphenol FCI Micro Cool Edge NF1/NGSFF 0.50mm-Pitch Connectors
Small form factor card edge connectors that support SSDs high-capacity & high-density applications.
Amphenol FCI Cool Edge 1.00mm PCIe Connectors
High-speed, space-saving connectors with 16Gb/s Gen 4 and 32Gb/s Gen 5 capabilities.
Amphenol FCI Cool Edge 0.80mm Hybrid Power & Signal Connectors
Addresses multiple standards like PCIe and serial attached SCSI (SAS)/SATA, delivers high speeds.
Amphenol FCI Cool Stack 0.80mm Hybrid Power & Signal Connector
Offers a one-piece high-speed, high-power solution while addressing multiple networking standards.
Infographic
