SparkFun Accessoires SparkFun

Résultats: 916
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS Modèle de ECAO Produit
Type
SparkFun Accessoires SparkFun Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp 310En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This DC Blower really moves some air! Pulling about 1Amp @ 12VDC this blower is rated at 16CFM (although it seems like more to us). We've used this blower to build small hovercrafts and to cool off on a hot day they're also handy for inflating "tra 200En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Brass Sponge 167En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun A solid state relay (SSR) allows you to control high-curent AC loads from lower voltage DC control circuitry. Solid state relays have several advantages over mechanical relays. One such advantage is that they can be switched by a much lower voltage a 112En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm). 1.282En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th 14En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun LiPo Battery Manager Battery Manager 218En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a tiny USB Microphone from Kinobo that plugs into your laptop desktop Raspberry Pi Jetson Nano Dev kit anything with a USB port you may be using as a computer to add microphone functionality. There is no need to install any extra software 23En stock
Min. : 1
Mult. : 1
Electromechanicals Microphones
SparkFun Accessoires SparkFun Load Cell - 5kg, Strght Bar(TAL220B)
Fiche technique
73En stock
Min. : 1
Mult. : 1

Sensors Load Cell - 5kg, Straight Bar
SparkFun Accessoires SparkFun This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
Fiche technique
261En stock
Min. : 1
Mult. : 1
Non
Cables USB 2.0 Type-C - 1m
SparkFun Accessoires SparkFun USB Mini-B Cable 6' Mini-B Cable 6'
Fiche technique
11En stock
Min. : 1
Mult. : 1

Cables
SparkFun Accessoires SparkFun These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
Fiche technique
14En stock
Min. : 1
Mult. : 1

Cables USB A to Micro-B Cable
SparkFun Accessoires SparkFun This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield. 4En stock
Min. : 1
Mult. : 1

Antennas LTE Antenna Duck SMA Male
SparkFun Accessoires SparkFun These are very small rare earth magnets - 0.125" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for 30En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple SPDT slide switch - great for use as an ON/OFF button or just as a general control switch. The pins are spaced by 0.1" however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC. 332En stock
Min. : 1
Mult. : 1

Switches
SparkFun Accessoires SparkFun Sometimes when you have too many choices it's hard to make a good decision. In fact there are times when you just want a bag of LEDs just one of each that's all you want. Well too bad you are getting two of each! The LED Rainbow Pack contains tw 10En stock
Min. : 1
Mult. : 1
Optoelectronics LED
SparkFun Accessoires SparkFun Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore they can be used to either warm something up or cool something down depending on which side you use. Y
Fiche technique
1En stock
Min. : 1
Mult. : 1

Accessories Thermoelectric Cooler
SparkFun Accessoires SparkFun Power Resistor Kit 10W (25 pack) 8En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interface. This new module includes the negative voltage circuitry on board!Utilizes the extremely common KS0108B parallel interfac 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Through-hole RJ11 socket with PCB mounting posts. 6-pin connection - housing accepts common telephone connectors/wiring.If you need a board for this connector be sure to check out our SparkFun RJ11 Breakout. Two boards are included so be sure to buy 73En stock
Min. : 1
Mult. : 1
Connectors
SparkFun Accessoires SparkFun USB Female Type B Connector 29En stock
Min. : 1
Mult. : 1

Connectors USB Connectors
SparkFun Accessoires SparkFun Single row of 30-holes female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use the 146En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 130mm lengthDocuments:JST connector
Fiche technique
43En stock
Min. : 1
Mult. : 1
Wire & Cable Jumper Wire
SparkFun Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Fiche technique
243En stock
Min. : 1
Mult. : 1
Wire & Cable Jumper Wire
SparkFun Accessoires SparkFun This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relie 68En stock
Min. : 1
Mult. : 1