Würth Elektronik WSEN-PDUS/WSEN-PDMS Differential Pressure Sensors
Würth Elektronik WSEN-PDUS/WSEN-PDMS Differential Pressure Sensors allow measurement of the pressure difference between two vertical pressure ports. These differential sensors feature a MEMS-based piezo-resistive sensing element and an ASIC integrated into a ceramic substrate. The WSEN-PDUS sensors include on-chip calibration, temperature compensation, and signal conditioning, providing highly accurate digital and analog pressure. These sensors feature high‑accuracy, fully calibrated 16‑bit outputs and flexible ranges from ±1kPa up to 1000kPa. The digital pressure data can be accessed by interfacing the sensor with the host controller via the I2C interface. Würth WSEN-PDUS sensors function with a 3.3V or 5V supply voltage and are ideal for use in inhalers, fume hoods, gas leak detection, HVAC, and filter monitoring.
Features
- PDMS:
- MEMS-based piezo-resistive sensing principle
- Very high accuracy (up to ±0.25% FSS tolerance)
- Different transfer functions from ±1kPa to 1000kPa
- Fully calibrated 16-bit digital and 16-bit analog pressure output
- Embedded temperature sensor
- Analog, I²C, and SPI communication interface
- CRC protected data readout
- -25°C up to 85°C operating temperature range
- PDUS:
- Digital output for pressure and temperature
- Embedded temperature sensor
- Analog and I2C digital communication interface
- MEMS-based piezo-resistive sensing principle
- High accuracy
Applications
- HVAC
- Filter monitoring
- Gas leak detection
- Inhalation devices
- Fume hood
Specifications
- 3.3V or 5V supply voltage
- 4mA typical current consumption
- 2kV electrostatic discharge protection
Videos
Block Diagram
Development Tools
The 2513254510492 evaluation board features a -100kPa to 1000kPa pressure range and 3.3V operating voltage.
The 2513254510192 evaluation board features a ±1kPa pressure level and 3.3V operating voltage.
