|
|
Accessoires SparkFun Jumper Wires Premium 6"" F/F Pack of 10
- PRT-08430
- SparkFun
-
1:
4,26 €
-
2En stock
-
1020/08/2026 attendu
|
Référence Mouser
474-PRT-08430
|
SparkFun
|
Accessoires SparkFun Jumper Wires Premium 6"" F/F Pack of 10
|
|
2En stock
1020/08/2026 attendu
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem
- PRT-08431
- SparkFun
-
1:
4,52 €
-
8En stock
|
Référence Mouser
474-PRT-08431
|
SparkFun
|
Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem
|
|
8En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun Screw Terminals 5mm Pitch (2-Pin)
- PRT-08432
- SparkFun
-
1:
0,946 €
-
316En stock
|
Référence Mouser
474-PRT-08432
|
SparkFun
|
Accessoires SparkFun Screw Terminals 5mm Pitch (2-Pin)
|
|
316En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun Screw Terminals 5mm Pitch (3-Pin)
- PRT-08433
- SparkFun
-
1:
0,946 €
-
40En stock
|
Référence Mouser
474-PRT-08433
|
SparkFun
|
Accessoires SparkFun Screw Terminals 5mm Pitch (3-Pin)
|
|
40En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.
- PRT-08865
- SparkFun
-
1:
3,23 €
-
18En stock
|
Référence Mouser
474-PRT-08865
|
SparkFun
|
Accessoires SparkFun Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.
|
|
18En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header. Comes in five packs of t
- PRT-09139
- SparkFun
-
1:
23,65 €
-
4En stock
-
517/08/2026 attendu
|
Référence Mouser
474-PRT-09139
|
SparkFun
|
Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header. Comes in five packs of t
|
|
4En stock
517/08/2026 attendu
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
- PRT-09173
- SparkFun
-
1:
1,29 €
-
116En stock
|
Référence Mouser
474-PRT-09173
|
SparkFun
|
Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
|
|
116En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
- PRT-09174
- SparkFun
-
1:
1,29 €
-
235En stock
|
Référence Mouser
474-PRT-09174
|
SparkFun
|
Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
|
|
235En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
- PRT-09194
- SparkFun
-
1:
28,81 €
-
2En stock
|
Référence Mouser
474-PRT-09194
|
SparkFun
|
Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
|
|
2En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
- PRT-09389
- SparkFun
-
1:
4,26 €
-
11En stock
|
Référence Mouser
474-PRT-09389
|
SparkFun
|
Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
|
|
11En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
- PRT-09390
- SparkFun
-
1:
32,64 €
-
5En stock
|
Référence Mouser
474-PRT-09390
|
SparkFun
|
Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
|
|
5En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun 9V to Barrel Jack Adapter
- PRT-09518
- SparkFun
-
1:
3,10 €
-
11En stock
|
Référence Mouser
474-PRT-09518
|
SparkFun
|
Accessoires SparkFun 9V to Barrel Jack Adapter
|
|
11En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie
- PRT-09567
- SparkFun
-
1:
5,98 €
-
11En stock
|
Référence Mouser
474-PRT-09567
|
SparkFun
|
Accessoires SparkFun Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie
|
|
11En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
- PRT-09914
- SparkFun
-
1:
1,08 €
-
793En stock
|
Référence Mouser
474-PRT-09914
|
SparkFun
|
Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
|
|
793En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD
- PRT-09916
- SparkFun
-
1:
1,73 €
-
104En stock
|
Référence Mouser
474-PRT-09916
|
SparkFun
|
Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD
|
|
104En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control
- PRT-09925
- SparkFun
-
1:
1,68 €
-
84En stock
|
Référence Mouser
474-PRT-09925
|
SparkFun
|
Accessoires SparkFun This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control
|
|
84En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
- PRT-10114
- SparkFun
-
1:
2,15 €
-
57En stock
|
Référence Mouser
474-PRT-10114
|
SparkFun
|
Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
|
|
57En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
- PRT-10363
- SparkFun
-
1:
1,31 €
-
8En stock
-
110Sur commande
|
Référence Mouser
474-PRT-10363
|
SparkFun
|
Accessoires SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
|
|
8En stock
110Sur commande
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10364
- SparkFun
-
1:
1,34 €
-
106En stock
|
Référence Mouser
474-PRT-10364
|
SparkFun
|
Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
106En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10366
- SparkFun
-
1:
1,38 €
-
120En stock
|
Référence Mouser
474-PRT-10366
|
SparkFun
|
Accessoires SparkFun This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
120En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10367
- SparkFun
-
1:
1,74 €
-
44En stock
|
Référence Mouser
474-PRT-10367
|
SparkFun
|
Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
44En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10370
- SparkFun
-
1:
2,08 €
-
67En stock
|
Référence Mouser
474-PRT-10370
|
SparkFun
|
Accessoires SparkFun This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
67En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10372
- SparkFun
-
1:
2,15 €
-
176En stock
-
27010/08/2026 attendu
|
Référence Mouser
474-PRT-10372
|
SparkFun
|
Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
176En stock
27010/08/2026 attendu
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
- PRT-10373
- SparkFun
-
1:
2,15 €
-
68En stock
|
Référence Mouser
474-PRT-10373
|
SparkFun
|
Accessoires SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
|
|
68En stock
|
|
Min. : 1
Mult. : 1
|
|
|
|
|
Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10374
- SparkFun
-
1:
2,37 €
-
59En stock
|
Référence Mouser
474-PRT-10374
|
SparkFun
|
Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
59En stock
|
|
Min. : 1
Mult. : 1
|
|
|