Tous les résultats (1.665)

Outils et fournitures
Ordre de tri:
Catégories triées par Nombre de résultats.

Solutions intégrées
Ordre de tri:
Catégories triées par Nombre de résultats.

Automatisation industrielle
Ordre de tri:
Catégories triées par Nombre de résultats.

Composants passifs

Capteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Fils et câbles
Ordre de tri:
Catégories triées par Nombre de résultats.

Connecteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Optoélectronique
Ordre de tri:
Catégories triées par Nombre de résultats.

Électromécanique
Ordre de tri:
Catégories triées par Nombre de résultats.

Semi-conducteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Boîtiers

Puissance

Tests et mesures
Ordre de tri:
Catégories triées par Nombre de résultats.

Gestion de la température

Non classifié
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Accessoires SparkFun This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room no 23En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Stackable Header 2x23 Pin Female 167En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 50En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
Fiche technique
59En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Soldering Iron Stand 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. 6En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA. 77En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 93En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
Fiche technique
36En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi 4En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
Fiche technique
19En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces. This is not a true piezoelectric speaker but behaves similarly. Instead of a piezoelectric crystal t 20En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f 30En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. 85En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht 22En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e 183En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial 10En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Fiche technique
155En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in
Fiche technique
30En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet
Fiche technique
275En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu 61En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con 70En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Jumper - 2 Pin 1.500En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 14En stock
Min. : 1
Mult. : 1