|
|
SparkFun Zubehör The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out micro:bits for p
- PRT-17252
- SparkFun
-
1:
2,54 €
-
75Auf Lager
-
100erwartet ab 19.08.2026
|
Mouser-Teilenr.
474-PRT-17252
|
SparkFun
|
SparkFun Zubehör The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 80 right angle PTH pins. Add this part to your board to create a handy way to swap out micro:bits for p
|
|
75Auf Lager
100erwartet ab 19.08.2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Flex Sensor 4.5"
- SEN-08606
- SparkFun
-
1:
19,37 €
-
22Auf Lager
|
Mouser-Teilenr.
474-SEN-08606
|
SparkFun
|
SparkFun Zubehör Flex Sensor 4.5"
|
|
22Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as
- SEN-08680
- SparkFun
-
1:
8,74 €
-
15Auf Lager
|
Mouser-Teilenr.
474-SEN-08680
|
SparkFun
|
SparkFun Zubehör These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as
|
|
15Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector center positive. This cable allows the user to use a USB port on a computer laptop or on our cigarette power supply to provide our development boards with 5V.The US
- TOL-08639
- SparkFun
-
1:
4,73 €
-
10Auf Lager
|
Mouser-Teilenr.
474-TOL-08639
|
SparkFun
|
SparkFun Zubehör This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector center positive. This cable allows the user to use a USB port on a computer laptop or on our cigarette power supply to provide our development boards with 5V.The US
|
|
10Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. We really like the quality and sturdiness of these crimp pliers. These pliers are capable of crimping very small 0.25 - 1.5mm crimp pins and
- TOL-13193
- SparkFun
-
1:
38,84 €
-
8Auf Lager
|
Mouser-Teilenr.
474-TOL-13193
|
SparkFun
|
SparkFun Zubehör These crimping pliers allow you to easily make your own wiring harnesses using crimp pins and cable housings. We really like the quality and sturdiness of these crimp pliers. These pliers are capable of crimping very small 0.25 - 1.5mm crimp pins and
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi
- TOL-13246
- SparkFun
-
1:
11,26 €
-
19Auf Lager
|
Mouser-Teilenr.
474-TOL-13246
|
SparkFun
|
SparkFun Zubehör Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi
|
|
19Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags und Transponder This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-11319
- SparkFun
-
1:
5,08 €
-
6Auf Lager
|
Mouser-Teilenr.
474-SEN-11319
|
SparkFun
|
NFC/RFID Tags und Transponder This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Magnetische / Reed-Schalter This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
- COM-10601
- SparkFun
-
1:
3,11 €
-
8Auf Lager
|
Mouser-Teilenr.
474-COM-10601
|
SparkFun
|
Magnetische / Reed-Schalter This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Bewegungs- & Positionssensoren für Plattenmontage The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09199
- SparkFun
-
1:
14,01 €
-
3Auf Lager
|
Mouser-Teilenr.
474-SEN-09199
|
SparkFun
|
Bewegungs- & Positionssensoren für Plattenmontage The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
3Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Entwicklungstools für optische Sensoren A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
- BOB-09322
- SparkFun
-
1:
1,67 €
-
427Auf Lager
|
Mouser-Teilenr.
474-BOB-09322
|
SparkFun
|
Entwicklungstools für optische Sensoren A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
|
|
427Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Entwicklungstools für LED-Leuchten Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
- COM-15200
- SparkFun
-
1:
6,20 €
-
11Auf Lager
-
17Auf Bestellung
|
Mouser-Teilenr.
474-COM-15200
|
SparkFun
|
Entwicklungstools für LED-Leuchten Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
|
|
11Auf Lager
17Auf Bestellung
Auf Bestellung:
7 erwartet ab 19.08.2026
10 erwartet ab 14.09.2026
Lieferzeit ab Hersteller:
15 Wochen
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Kraftsensoren und Kraftaufnehmer This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
- SEN-09674
- SparkFun
-
1:
30,23 €
-
2Auf Lager
|
Mouser-Teilenr.
474-SEN-09674
|
SparkFun
|
Kraftsensoren und Kraftaufnehmer This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower
|
|
2Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sockel & Kabelgehäuse This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
- PRT-16581
- SparkFun
-
1:
2,43 €
-
87Auf Lager
|
Mouser-Teilenr.
474-PRT-16581
|
SparkFun
|
Sockel & Kabelgehäuse This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
|
|
87Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Gehäuse für Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
- PRT-17868
- SparkFun
-
1:
5,40 €
-
8Auf Lager
|
Mouser-Teilenr.
474-PRT-17868
|
SparkFun
|
Gehäuse für Single Board Computing The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe
|
|
8Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
WLAN Development Tools – 802.11 SparkFun ESP8266 Thing Dev Board
- WRL-13804
- SparkFun
-
1:
17,42 €
-
4Auf Lager
|
Mouser-Teilenr.
474-WRL-13804
|
SparkFun
|
WLAN Development Tools – 802.11 SparkFun ESP8266 Thing Dev Board
|
|
4Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Antennenentwicklungstools This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
- WRL-17389
- SparkFun
-
1:
15,09 €
-
6Auf Lager
|
Mouser-Teilenr.
474-WRL-17389
|
SparkFun
|
Antennenentwicklungstools This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro
|
|
6Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Zigbee Development Tools – 802.15.4 XBee Shield
- WRL-12847
- SparkFun
-
1:
18,63 €
-
39Auf Lager
|
Mouser-Teilenr.
474-WRL-12847
|
SparkFun
|
Zigbee Development Tools – 802.15.4 XBee Shield
|
|
39Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Lernkits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
- PRT-09353
- SparkFun
-
1:
9,42 €
-
25Auf Lager
|
Mouser-Teilenr.
474-PRT-09353
|
SparkFun
|
Lernkits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
|
|
25Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Klemmen Quick Disconnects- Female 1/4 Pk of 5
- PRT-14407
- SparkFun
-
1:
0,516 €
-
348Auf Lager
|
Mouser-Teilenr.
474-PRT-14407
|
SparkFun
|
Klemmen Quick Disconnects- Female 1/4 Pk of 5
|
|
348Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Development Tools RFID Tag (125kHz)
- COM-14325
- SparkFun
-
1:
2,37 €
-
84Auf Lager
|
Mouser-Teilenr.
474-COM-14325
|
SparkFun
|
NFC/RFID Development Tools RFID Tag (125kHz)
|
|
84Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Gehäuse für Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
- PRT-17867
- SparkFun
-
1:
6,55 €
-
5Auf Lager
|
Mouser-Teilenr.
474-PRT-17867
|
SparkFun
|
Gehäuse für Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
|
|
5Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC-Motoren These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
- ROB-13258
- SparkFun
-
1:
8,31 €
-
10Auf Lager
|
Mouser-Teilenr.
474-ROB-13258
|
SparkFun
|
DC-Motoren These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
|
|
10Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch. The hot red safety cover protects a toggle switc
- COM-09278
- SparkFun
-
1:
2,15 €
-
67Auf Lager
|
Mouser-Teilenr.
474-COM-09278
|
SparkFun
|
SparkFun Zubehör It's not what project you have in mind that may use a rocket launch switch... The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch. The hot red safety cover protects a toggle switc
|
|
67Auf Lager
|
|
Min.: 1
Mult.: 1
|
Nein
|
|
|
|
SparkFun Zubehör This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" ( 150mm) cable has been terminated with a JST-PH connector.The connector mates the JST socket on the micro:bit perfectly allowing you to easily make your p
- PRT-15101
- SparkFun
-
1:
2,15 €
-
35Auf Lager
|
Mouser-Teilenr.
474-PRT-15101
|
SparkFun
|
SparkFun Zubehör This is a unique two-cell AAA battery holder built specifically for the BBC micro:bit. The 6" ( 150mm) cable has been terminated with a JST-PH connector.The connector mates the JST socket on the micro:bit perfectly allowing you to easily make your p
|
|
35Auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör UHF RFID Cable (TNC to RP-SMA)
- CAB-14132
- SparkFun
-
1:
7,27 €
-
12Auf Lager
|
Mouser-Teilenr.
474-CAB-14132
|
SparkFun
|
SparkFun Zubehör UHF RFID Cable (TNC to RP-SMA)
|
|
12Auf Lager
|
|
Min.: 1
Mult.: 1
|
Nein
|
|