SparkFun Outils d’ingénierie

Outils de développement de circuits intégrés pour la gestion de l'alimentation LilyPad Vibe Board

Cartes et kits de développement - AVR Here at SparkFun we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside

Outils de développement de circuits intégrés de mémoire microSD Shield Shield

Cartes et kits de développement - AVR LilyPad Arduino 328 Main Board

Outils de développement de capteurs optiques Give your wearable projects the ability to react to their environment! The LilyPad Light Sensor is a sewable breakout board with a built-in ALS-PT19 sensor that outputs a variable analog voltage based on ambient light. To use the light sensor conn

Outils de développement de circuits intégrés pour la gestion de l'alimentation It's time to effectively manage the power distribution into your project and with the SparkFun Power Delivery Board you can! Traditional power adapters can provide a wide range of current but the voltage stays fixed at 5V. With the SparkFun Power De

Cartes et kits de développement - ARM The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connec

Outils de développement de systèmes de sécurité / d'authentification ???? Product Restrictions: To access certain features of the ATECC608A users will need to contact Microchip and sign an NDA contract to obtain the complete datasheet. Due to the required NDA - technical support an Arduino library and hookup guide

Outils de développement de capteurs multifonction The MyoWare 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where the M

Outils de développement de capteurs multifonction The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your

Outils de développement d'interface The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB 2.0 compatibl

Outils de développement d'afficheurs The SparkFun Micro OLED Breakout Board breaks out a small monochrome blue-on-black OLED. It s "micro" but it still packs a punch the OLED display is crisp and you can fit a deceivingly large amount of graphics on there. This breakout is perf