|
|
SparkFun Zubehör This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10362
- SparkFun
-
1:
1,13 €
-
60Auf Bestellung
|
Mouser-Teilenr.
474-PRT-10362
|
SparkFun
|
SparkFun Zubehör This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
60Auf Bestellung
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DFRobot-Zubehör Jumper Wire - 0.1"(housing pin not included)
- FIT0215
- DFRobot
-
1:
0,774 €
-
Nicht auf Lager
|
Mouser-Teilenr.
426-FIT0215
|
DFRobot
|
DFRobot-Zubehör Jumper Wire - 0.1"(housing pin not included)
|
|
Nicht auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DFRobot-Zubehör Jumper Wires 7.8in F/M 10 Pack
- FIT0301
- DFRobot
-
1:
1,55 €
-
Nicht auf Lager
|
Mouser-Teilenr.
426-FIT0301
|
DFRobot
|
DFRobot-Zubehör Jumper Wires 7.8in F/M 10 Pack
|
|
Nicht auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 100mm lengthDocuments:JST connector
- PRT-08671
- SparkFun
-
1:
0,946 €
-
Nicht auf Lager
|
Mouser-Teilenr.
474-PRT-08671
|
SparkFun
|
SparkFun Zubehör This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 100mm lengthDocuments:JST connector
|
|
Nicht auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
- PRT-09922
- SparkFun
-
1:
2,52 €
-
Nicht auf Lager
|
Mouser-Teilenr.
474-PRT-09922
|
SparkFun
|
SparkFun Zubehör This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
|
|
Nicht auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire it's better for higher current applications.Dimensions: 6" lengthDocuments:Datasheet
- PRT-09923
- SparkFun
-
1:
2,37 €
-
Nicht auf Lager
|
Mouser-Teilenr.
474-PRT-09923
|
SparkFun
|
SparkFun Zubehör This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire it's better for higher current applications.Dimensions: 6" lengthDocuments:Datasheet
|
|
Nicht auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Zubehör Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j
- PRT-16662
- SparkFun
-
1:
1,08 €
-
Nicht auf Lager
|
Mouser-Teilenr.
474-PRT-16662
|
SparkFun
|
SparkFun Zubehör Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j
|
|
Nicht auf Lager
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Seeed Studio Zubehör 4 pin dual-female jumper wire - 300mm (5 PCs pack)
- 110990080
- Seeed Studio
-
Beschränkte Verfügbarkeit
|
Mouser-Teilenr.
713-110990080
|
Seeed Studio
|
Seeed Studio Zubehör 4 pin dual-female jumper wire - 300mm (5 PCs pack)
|
|
|
|
|
|
|
