Tous les résultats (1.945)

Ordre de tri:
Catégories triées par Nombre de résultats.
Sélectionner Image Référence Fab. Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité. Qté. RoHS
SparkFun Accessoires SparkFun Jumper Wires Premium 6"" F/F Pack of 10 2En stock
1020/08/2026 attendu
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female header. Combine these with our female to female jumpers to create a male to fem 8En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Screw Terminals 5mm Pitch (2-Pin) 316En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Screw Terminals 5mm Pitch (3-Pin) 40En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'. 18En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1" header. Comes in five packs of t 4En stock
517/08/2026 attendu
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board 116En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board 235En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens 2En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j 11En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty 5En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 9V to Barrel Jack Adapter 11En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie 11En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo 793En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD 104En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover which is secured with a small Phillips head screw. Another bonus is the ON/OFF switch which can be used to control 84En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board 57En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments 8En stock
110Sur commande
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments: 106En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D 120En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D 44En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments: 67En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments: 176En stock
27010/08/2026 attendu
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument 68En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments 59En stock
Min. : 1
Mult. : 1