Tous les résultats (1.667)

Outils et fournitures
Ordre de tri:
Catégories triées par Nombre de résultats.

Solutions intégrées
Ordre de tri:
Catégories triées par Nombre de résultats.

Automatisation industrielle
Ordre de tri:
Catégories triées par Nombre de résultats.

Composants passifs

Capteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Fils et câbles
Ordre de tri:
Catégories triées par Nombre de résultats.

Connecteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Optoélectronique
Ordre de tri:
Catégories triées par Nombre de résultats.

Électromécanique
Ordre de tri:
Catégories triées par Nombre de résultats.

Semi-conducteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Boîtiers

Puissance

Tests et mesures
Ordre de tri:
Catégories triées par Nombre de résultats.

Gestion de la température

Non classifié
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Accessoires SparkFun Soldering Iron Stand 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector. 6En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA. 77En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 93En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
Fiche technique
76En stock
Min. : 1
Mult. : 1

SparkFun Outils de développement de capteurs optiques A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate photodiode or phototransistor). This PCB has three connections for PWR GND and Signal.When the gate is clear SIG will be high (>4.9V). When the gate is blocked b
Fiche technique
427En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
Fiche technique
261En stock
Min. : 1
Mult. : 1
Non
SparkFun Outils de développement d'éclairage LED Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
Fiche technique
11En stock
1714/09/2026 attendu
Min. : 1
Mult. : 1

SparkFun Capteurs de force et cellules de charge This very long force sensitive resistor - over 2 feet - has a sensing area of 0.25x24". This FSR from Interlink Electronics will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower 6En stock
Min. : 1
Mult. : 1

SparkFun Étiquettes et transpondeurs NFC/RFID This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
Fiche technique
6En stock
Min. : 1
Mult. : 1
SparkFun Kits éducatifs We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of 25En stock
Min. : 1
Mult. : 1
SparkFun Embases et logements de câbles This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
Fiche technique
87En stock
Min. : 1
Mult. : 1

SparkFun Boîtiers pour ordinateurs mono-carte The Mountable MI:pro is a simple and compact protective case for the micro:bit. This case has been specifically designed with portability and expansion in mind and is compatible with both the original micro:bit V1 and the micro:bit V2. These cases fe 8En stock
Min. : 1
Mult. : 1
SparkFun Outils de développement Wi-Fi - 802.11 SparkFun ESP8266 Thing Dev Board
Fiche technique
4En stock
Min. : 1
Mult. : 1

SparkFun Outils de développement de l'antenne This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The duck style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you re working in industrial enviro 6En stock
Min. : 1
Mult. : 1
SparkFun Bornes Quick Disconnects- Female 1/4 Pk of 5 348En stock
Min. : 1
Mult. : 1

SparkFun Outils de développement NFC/RFID RFID Tag (125kHz) 84En stock
Min. : 1
Mult. : 1

SparkFun Boîtiers pour ordinateurs mono-carte This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas 5En stock
Min. : 1
Mult. : 1
SparkFun Moteurs CC These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
Fiche technique
10En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun UHF RFID Cable (TNC to RP-SMA)
Fiche technique
12En stock
Min. : 1
Mult. : 1
Non
SparkFun Accessoires SparkFun Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard your own 10-key or just a custom input for your computer Cherry MX switches give you that satisfying keyboard click. Now we
Fiche technique
281En stock
Min. : 1
Mult. : 1
Non
SparkFun Accessoires SparkFun USB Mini-B Cable 6"
274En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Alligator Test Leads Multicolored 10 pac 186En stock
Min. : 1
Mult. : 1
SparkFun Interrupteurs à tiges/magnétiques This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens. 8En stock
Min. : 1
Mult. : 1