MIKROE-3148

Mikroe
932-MIKROE-3148
MIKROE-3148

Fab. :

Description :
Outils de développement d'éclairage LED PWR 2 click

En stock: 4

Stock:
4 Expédition possible immédiatement
Minimum : 1   Multiples : 1
Prix unitaire:
-,-- €
Ext. Prix:
-,-- €
Tarif est.:

Prix (EUR)

Qté. Prix unitaire
Ext. Prix
27,52 € 27,52 €

Attribut de produit Valeur d'attribut Sélectionner l'attribut
Mikroe
Catégorie du produit: Outils de développement d'éclairage LED
RoHS:  
Add-On Boards
LT8500
3.3 V, 5 V
Marque: Mikroe
Type de produit: LED Lighting Development Tools
Nombre de pièces de l'usine: 1
Sous-catégorie: Development Tools
Poids de l''unité: 30,786 g
Produits trouvés:
Pour consulter des produits similaires, sélectionnez au moins une case.
Sélectionnez au moins une case pour consulter des produits similaires dans cette catégorie.
Attributs sélectionnés: 0

CAHTS:
8473302000
USHTS:
8473301180
MXHTS:
8473300401
ECCN:
EAR99

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.

Interface Click Boards

Mikroe Interface Click Boards are used to add new interfaces to boards for applications and designs. Mikroe Click Boards are based around the mikroBUS™ interface standard and easily add incredible system capabilities. The devices include interfaces like Ethernet, USB, and Fiber Optics, to name a few.

MIKROE-3148 PWM 2 Click

Mikroe MIKROE-3148 PWM 2 Click is ideal for driving LEDs and offers 48 independently controlled PWM channels, available over the onboard headers. Each channel has a 12-bit PWM register associated with it, with the addition of the 6-bit correction register, also known as the dot correction register.  PWM 2 can detect synchronization errors and open LED errors, signaling the error via the dedicated pin and the status frame. Mikroe MIKROE-3148 supports cascading, exposing all the necessary pins on the onboard headers to support an extensive array of LED elements.