Signal Conditioning

Marki Microwave Signal Conditioning products include catalog filters, diplexers, equalizers, power dividers, couplers, triple-balanced mixers, bias tees, double-balanced and I/Q mixers, limiters, multipliers, and baluns. The extensive portfolio includes multiple form factors, including die, surface-mount, and connectorized solutions, and spans frequencies from DC to sub-terahertz. Marki Microwave is dedicated to creating limitless possibilities, expanding the catalog, and empowering the industry to develop next-generation systems.

Ergebnisse: 80
Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS ECAD Model Produkt-Typ
Produkt
Frequenz
Frequenzbereich
Nennspannung
Scheinwiderstand (Impedanz)
Montage
Minimale Betriebstemperatur
Maximale Betriebstemperatur
Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
Datenblatt
26Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning Baluns 10 MHz to 12 GHz 10 MHz to 12 GHz SMD/SMT - 55 C + 100 dB
Marki Microwave Signalaufbereitung The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
3Auf Lager
3erwartet ab 03.11.2026
Min.: 1
Mult.: 1

Signal Conditioning Bias Tees 4 kHz to 40 GHz 30 VDC 50 Ohms Connector
Marki Microwave Signalaufbereitung The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning 10.5 GHz to 26 GHz 10.5 GHz to 26 GHz 5 VDC 50 Ohms Connector - 55 C + 85 C
Marki Microwave Signalaufbereitung The HLM-40PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of 14 dBm.
Datenblatt
22Auf Lager
50erwartet ab 09.09.2026
Min.: 1
Mult.: 1

Signal Conditioning 0 Hz to 40 GHz 0 Hz to 40 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Signalaufbereitung MM1-0212L is a low power GaAs MMIC double balanced mixer that operates at LO powers as a low as +1 dBm. MM1-0212L is a low frequency, low power S band mixer that works well as both an up and down converter to through X band.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 3 GHz, 2 GHz to 12 GHz 0 Hz to 3 GHz, 2 GHz to 12 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Signalaufbereitung The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning Power Combiners Connector
Marki Microwave Signalaufbereitung 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
Datenblatt
1Auf Lager
4erwartet ab 01.01.2027
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers 50 Ohms Connector
Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Datenblatt
3Auf Lager
5erwartet ab 09.12.2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms Connector
Marki Microwave Signalaufbereitung The HLM-20PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-20GHz bandwidth. It offers low insertion loss and excellent return loss from DC through K band and has a typical 1 dB compression point of 15 dBm.
Datenblatt
36Auf Lager
125erwartet ab 31.12.2026
Min.: 1
Mult.: 1

Signal Conditioning 0 Hz to 20 GHz 0 Hz to 20 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Signalaufbereitung The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
Datenblatt
1Auf Lager
2erwartet ab 05.11.2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 1 MHz to 7 GHz, 1 MHz to 4 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Signalaufbereitung The BT-0010SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 10 GHz bandwidth.
Datenblatt
8Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning 20 MHz to 10 GHz 20 MHz to 10 GHz 50 Ohms SMD/SMT - 65 C + 125 C
Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Datenblatt
4Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning Baluns 500 kHz to 3 GHz 500 kHz to 3 GHz - 55 C + 100 C
Marki Microwave Signalaufbereitung The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
Datenblatt
1Auf Lager
1erwartet ab 25.09.2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 5 MHz to 26.5 GHz 5 MHz to 26.5 GHz 50 Ohms Connector - 55 C + 85 C
Marki Microwave Signalaufbereitung The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning 0 Hz to 40 GHz 0 Hz to 40 GHz Connector - 55 C + 100 C
Marki Microwave Signalaufbereitung The MPDR-0070CSP2 is a small footprint mmWave MMIC DC-70 GHz 2-Way resistive power divider/power splitter featuring low 1.5 dB insertion loss in our compact CSP2 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner.
Datenblatt
25Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C
Marki Microwave Signalaufbereitung The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning 5.25 GHz to 14 GHz, 21 GHz to 56 GHz 5.25 GHz to 14 GHz, 21 GHz to 56 GHz - 40 C + 50 C
Marki Microwave Signalaufbereitung The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.
Datenblatt
4Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 12 GHz, 8 GHz to 32 GHz 0 Hz to 12 GHz, 8 GHz to 32 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Signalaufbereitung The MM1-0312H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Datenblatt
4Auf Lager
2erwartet ab 30.10.2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 4.5 GHz, 3 GHz to 12 GHz 0 Hz to 4.5 GHz, 3 GHz to 12 GHz Connector - 55 C + 100 C
Marki Microwave Signalaufbereitung The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Datenblatt
6Auf Lager
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 9 GHz, 6 GHz to 26.5 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
Datenblatt
90Auf Bestellung
Min.: 1
Mult.: 1

Signal Conditioning Baluns 10 MHz to 12 GHz 10 MHz to 12 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Signalaufbereitung The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth.
Datenblatt
1Auf Lager
4erwartet ab 08.01.2027
Min.: 1
Mult.: 1

Signal Conditioning Baluns 300 kHz to 67 GHz 300 kHz to 67 GHz
Marki Microwave Signalaufbereitung A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of +11 dBm.
Datenblatt
363Auf Bestellung
Min.: 1
Mult.: 1
Signal Conditioning 0 Hz to 40 GHz 0 Hz to 40 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Signalaufbereitung The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
Datenblatt
112Auf Bestellung
Min.: 1
Mult.: 1

Signal Conditioning Baluns 2 GHz to 50 GHz 2 GHz to 50 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Signalaufbereitung A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Datenblatt
16Auf Bestellung
Min.: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms
Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Datenblatt
94erwartet ab 08.01.2027
Min.: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz SMD/SMT - 55 C + 100 C