Tous les résultats (1.681)

Sélectionnez une catégorie parmi les suivantes pour voir les options de filtrage et affiner votre recherche.

Outils et fournitures
Ordre de tri:
Catégories triées par Nombre de résultats.

Solutions intégrées
Ordre de tri:
Catégories triées par Nombre de résultats.

Automatisation industrielle
Ordre de tri:
Catégories triées par Nombre de résultats.

Composants passifs

Capteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Fils et câbles
Ordre de tri:
Catégories triées par Nombre de résultats.

Connecteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Optoélectronique
Ordre de tri:
Catégories triées par Nombre de résultats.

Électromécanique
Ordre de tri:
Catégories triées par Nombre de résultats.

Semi-conducteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Boîtiers

Puissance

Tests et mesures
Ordre de tri:
Catégories triées par Nombre de résultats.

Gestion de la température

Non classifié
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Accessoires SparkFun Here is a six pin vertical 1.0mm pitch connector. It is useful if you need something very tiny as a connection. These are not the standard JST type connectors we use on most of our boards but are actually the much smaller JST-SH type. 17En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Heat Sink Compound 48En stock
115Sur commande
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 2x3 Pin Shrouded Header 31En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This red Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room no 23En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Stackable Header 2x23 Pin Female 200En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet 61En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Soldering Iron Stand 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA. 77En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 43En stock
7020/07/2026 attendu
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
Fiche technique
96En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Unlock the hidden potential of your motherboard s USB headers. This 6-foot extension cable features a 4-pin female header on one end and a panel-mountable USB-A connector on the other allowing you to place a standard USB port exactly where you nee 41En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn't one of them. Don't worry though we've got you covered. This 6ft converter plugs into your computer's USB port and provides you with a DB-9 RSR23 12En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really well). This button is great for user input on a PCB or a good big reset button on a breadboard. Breadboard friend 197En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun MP3 and MIDI Codec - VS1063 68En stock
9004/08/2026 attendu
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This simple on-off switch is rated for 20A at 12V but who cares about all that it looks way awesome. These toggle switches come with those missile switch covers that make your project look like something out of a spy movie. They're also a great safe 44En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Tactile Button SMD (6mm) 58En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Amphenol FCI Clinchr Conn. (3 POS,F)
Fiche technique
17En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Small heat sink for TO-220 components. Ideal for keeping your 5V and 3.3V regulators running cool. Black anodized bolt on type with 2.5W dissipation. 155En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts 51En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs. 393En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Standard Philips-head 4-40 screws. They are 1/2" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware. 12En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Description: How could anyone improve on the clear plastic breadboard. I mean that's pretty sweet right?What if it was red?This translucent red breadboard is probably the coolest looking regular solderless breadboard there is. It has 2 power buses 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
Fiche technique
9En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Needle Nose Pliers 88En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun The Solder Vacuum a great (and sometimes under appreciated) little tool for solder rework. It allows you to pull the molten solder out of a connection or via with ease. To use it you simply depress the plunger heat up your solder place the nozzle 3En stock
Min. : 1
Mult. : 1