Tous les résultats (1.675)

Sélectionnez une catégorie parmi les suivantes pour voir les options de filtrage et affiner votre recherche.

Outils et fournitures
Ordre de tri:
Catégories triées par Nombre de résultats.

Solutions intégrées
Ordre de tri:
Catégories triées par Nombre de résultats.

Automatisation industrielle
Ordre de tri:
Catégories triées par Nombre de résultats.

Composants passifs

Capteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Fils et câbles
Ordre de tri:
Catégories triées par Nombre de résultats.

Connecteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Optoélectronique
Ordre de tri:
Catégories triées par Nombre de résultats.

Électromécanique
Ordre de tri:
Catégories triées par Nombre de résultats.

Semi-conducteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Boîtiers

Puissance

Tests et mesures
Ordre de tri:
Catégories triées par Nombre de résultats.

Gestion de la température

Non classifié
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Accessoires SparkFun This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration. You should not need this adapter with any of our antennas or 11En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These are high quality Single Pole - Double Throw (SPDT) sealed relays. Use them to switch high voltage and/or high current devices.This relay's coil is rated up to 12V with a minimum switching voltage of 5V. The contacts are rated up to 5A (@250VA 10En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Transistor NPN (2N3904) 1.212En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Voltage Regulator 3.3V 102En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard yellow LED. The lens is 3mm in diameter and it is diffused.Features:2.0-2.4VDC forward dropMax current 98En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These are small, rare earth magnets - 3/16" rings. Composed of Neodymium/Iron/Boron (NdFeB). These magnets are curiously strong and make for a great way to attach tools to a metal workbench. 145En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Atmel's itty-bitty ATtiny85 8-Bit Processor. 8K of program space 6 I/O lines and 4-channel 10 bit ADC. Runs up to 20MHz with external crystal. Package can be programmed in circuit.Documents:Product CardArduino Board Definitions 2En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun LED - Assorted (20 pack) Diameter 5mm 10En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun USB Type 'Mini-B' Female SMD connector. This is a 5-pin Mini-B surface mount connector commonly found in MP3 players media/disk readers USB hubs pretty much anything small and USB.Documents: Datasheet 7En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These are simple through-hole RJ45 sockets with PCB mounting posts. These 8-pin connectors are commonly used in conjunction with Cat5 Cat5e and Cat6 Ethernet cables. Because Ethernet cable is so ubiquitous these are awesome for projects where you
Fiche technique
161En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun There are your standard Philips-head 4-40 screws. They are 1/4" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware. 14En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a simple 2x3 female PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other. 198En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun One-Wire Ambient Temp Sensor MAX31820 21En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long 9En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This 3ft Category 6 (CAT 6) Ethernet cable is the solution to your internet working needs. With a speed of up to 500MHz you can connect to your LAN/WAN segments and networking gear at maximum speed. Also with its superior connector you get a cable t 9En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is the LM317TG voltage regulator a three-terminal positive regulator with a 1.2V to 37V adjustable output voltage. This adjustable regulator provides a local regulation internal current limiting thermal shut-down control and safe area protec 12En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun 1/6th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our bags of resistors. 25En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin GND to the other and the center pin will have a voltage that varies from 0 to VCC depending on the rotati 161En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:620-625nm Red1.8-2.2VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](htt 70En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is the BC337 an NPN silicon BJT (Bipolar Junction Transistor). This little transistor can help in your project by being used to help drive large loads or amplifying or switching applications. The BC337 is specifically rated at 50V and 800mA max
Fiche technique
50En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a through-hole 12mm coin cell battery holder. It's the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. Metal housing is + PCB pad underneath is -.This battery holder is sold in single un 26En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Audio Jack 3.5mm 192En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty j 7En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun JST Right-Angle Connector TH 2-Pin
Fiche technique
506En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun These nylon standoffs are 3/4" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table.Sold in packs of 10. Check below for matching screws. 4En stock
Min. : 1
Mult. : 1