Tous les résultats (1.702)

Accessoires SparkFun This is a single pole 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our other rotary switch this model is much more robust and capable of handling larger currents and voltages. You may find this rot

Accessoires SparkFun Amphenol FCI Clinchr Conn. (2 POS,M)

Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumper

Accessoires SparkFun This is a 3-pin through-hole PH series JST connector. The pins are spaced by 2mm.We really like the solid locking feeling and high current rating on these small connectors. This connector mates with our 3-pin jumper wire and may be useful for inter

Accessoires SparkFun BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut.Hookup / Related ProductSMA to BMC Male Cable RG316 - 1m

Accessoires SparkFun These are standard 0.1" spaced header pins that can be through-hole mounted. This header connects perfectly with most 6-pin male headers.This is a 6-Pin female header.Documents:Datasheet

Accessoires SparkFun You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm

Accessoires SparkFun These needle tipped multimeter probes are great for attaching to multimeters power supplies oscilloscopes function generators etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn but tha

Accessoires SparkFun This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your

Accessoires SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

Accessoires SparkFun PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e

Accessoires SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding