Tous les résultats (1.702)

Sélectionnez une catégorie parmi les suivantes pour voir les options de filtrage et affiner votre recherche.

Outils et fournitures
Ordre de tri:
Catégories triées par Nombre de résultats.

Solutions intégrées
Ordre de tri:
Catégories triées par Nombre de résultats.

Automatisation industrielle
Ordre de tri:
Catégories triées par Nombre de résultats.

Composants passifs

Capteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Fils et câbles
Ordre de tri:
Catégories triées par Nombre de résultats.

Connecteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Optoélectronique
Ordre de tri:
Catégories triées par Nombre de résultats.

Électromécanique
Ordre de tri:
Catégories triées par Nombre de résultats.

Semi-conducteurs
Ordre de tri:
Catégories triées par Nombre de résultats.

Boîtiers

Puissance

Tests et mesures
Ordre de tri:
Catégories triées par Nombre de résultats.

Gestion de la température

Non classifié
Sélectionner Image Référence
 Fab.
Description Fiche technique Disponibilité Prix (EUR) Filtrer les résultats dans le tableau par prix unitaire basé sur votre quantité.
Qté. RoHS
SparkFun Accessoires SparkFun This is your basic tube of unleaded (Pb-free) solder with a no clean water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper 23En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas. 11En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth Nordic or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You 20En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun USB 2.0 type A to micro USB 5-pin. This is a new smaller connector for USB devices. Micro USB connectors are about half the height of mini USB. Micro USB is found on newer hand held devices like cell phones and portable media devices. Works great wi 5En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of your
Fiche technique
24En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This is a very simple clear infrared LED. These devices operate between 940-950nm and work well for generic IR systems including remote control and touch-less object sensing. Pair them with any of our IR receivers (see Related Items below). 1.5VDC f 30En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA. 88En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:465-470nm Blue3.0-3.4VDC Forward Voltage20mA Forward Current40 degree viewing angle100-150 MCD outputDocuments:[Datasheet](ht 25En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun PICAXE-08M2 microcontroller chip.PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development environment is free! PICAXE has some e 176En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Huge 10mm through-hole LEDs. Mood-light an entire wall!Features:3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-20 000 MCD outputDocuments:DatasheetLED Tutorial 10En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
Fiche technique
166En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun It's your basic black action button! This is a very useful small panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including leads) 70En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun LilyPad Slide Switch 10En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet 351En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu 28En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con 10En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun Jumper - 2 Pin 716En stock
30004/08/2026 attendu
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 14En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f 12En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun This 4-pin ATX right angle connector mates up to the standard 4-pin computer peripheral port often found on ATX power supplies. This connector will also serve as a replacement to that found in the SparkFun ATX Power Connector Breakout Kit.
Fiche technique
44En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out micro:bits for p
Fiche technique
9En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This
Fiche technique
2En stock
Min. : 1
Mult. : 1

SparkFun Accessoires SparkFun Solder wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Solder wick is composed of copper threads braided together. Flux is normally ad 15En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun We don't say this lightly: this might be the best solder on the market! There we said it. This "Special Blend" wasn't just picked from a catalog; it is the result of a quest to find the perfect alloy for our own production lines here at SparkFun. Af 3En stock
Min. : 1
Mult. : 1
SparkFun Accessoires SparkFun U.FL SMD Connector
Fiche technique
45En stock
Min. : 1
Mult. : 1