TCA9534APWR

Texas Instruments
595-TCA9534APWR
TCA9534APWR

Fab. :

Description :
Interface - Extensions d'E/S Remote 8B I2C and Lo w-Pwr I/O Expander

Modèle de ECAO:
Téléchargez gratuitement le chargeur de bibliothèque pour convertir ce fichier pour votre outil ECAD. En savoir plus sur le modèle ECAD.

En stock: 3.180

Stock:
3.180 Expédition possible immédiatement
Délai usine :
12 Semaines Délai de production estimé en usine pour des quantités supérieures à celles indiquées.
Minimum : 1   Multiples : 1
Prix unitaire:
-,-- €
Ext. Prix:
-,-- €
Tarif est.:
Conditionnement:
Bobine complète(s) (commandez en multiples de 2000)

Prix (EUR)

Qté. Prix unitaire
Ext. Prix
Ruban à découper / MouseReel™
1,44 € 1,44 €
1,06 € 10,60 €
0,963 € 24,08 €
0,853 € 85,30 €
0,802 € 200,50 €
0,772 € 386,00 €
0,747 € 747,00 €
Bobine complète(s) (commandez en multiples de 2000)
0,721 € 1.442,00 €
0,704 € 2.816,00 €
† Les frais pour 5,00 € MouseReel™ seront calculés et ajoutés à votre panier. Les commandes MouseReel™ ne peuvent être ni annulées ni retournées.

Attribut de produit Valeur d'attribut Sélectionner l'attribut
Texas Instruments
Catégorie du produit: Interface - Extensions d'E/S
RoHS:  
TCA9534A
SMD/SMT
TSSOP-16
I2C, Serial, SMBus
8 I/O
With Interrupt
1.65 V
5.5 V
400 kHz
- 40 C
+ 85 C
Reel
Cut Tape
MouseReel
2 kV
Marque: Texas Instruments
Fonctionnalités: Configuration Registers, Interrupt Pin
Type de produit: I/O Expanders
Nombre de pièces de l'usine: 2000
Sous-catégorie: Interface ICs
Poids de l''unité: 58,100 mg
Produits trouvés:
Pour consulter des produits similaires, sélectionnez au moins une case.
Sélectionnez au moins une case pour consulter des produits similaires dans cette catégorie.
Attributs sélectionnés: 0

Cette fonctionnalité nécessite l'activation de JavaScript.

TARIC:
8542399000
CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
MXHTS:
8542399901
ECCN:
EAR99

TCA9534A Low-Power I/O Expander

Texas Instruments TCA9534A Low-Power I/O Expander provides 8 bits of general purpose parallel input and output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus) protocol. The TCA9534A can operate with a power supply voltage ranging from 1.65V to 5.5V. This voltage range allows for use with a wide range of devices. The device supports 100kHz (Standard-mode) and 400kHz (Fast-mode) clock frequencies. I/O expanders such as the TCA9534A provide a simple solution when additional I/Os are needed for switches, sensors, pushbuttons, LEDs, fans, and other similar devices. The features of the TCA9534A include an interrupt that is generated on the INT pin. This interrupt allows the master to know when an input port changes state. The A0, A1, and A2 hardware selectable address pins allow up to eight devices on the same I2C bus. The device can also be reset to its default state by cycling the power supply and causing a power-on reset.