RT8510GQW

Richtek
835-RT8510GQW
RT8510GQW

Fab. :

Description :
CI de pilotes d’éclairage par LED 43V 4-CH LED Driver

Modèle de ECAO:
Téléchargez gratuitement le chargeur de bibliothèque pour convertir ce fichier pour votre outil ECAD. En savoir plus sur le modèle ECAD.

En stock: 1.460

Stock:
1.460 Expédition possible immédiatement
Minimum : 1   Multiples : 1
Prix unitaire:
-,-- €
Ext. Prix:
-,-- €
Tarif est.:

Prix (EUR)

Qté. Prix unitaire
Ext. Prix
2,37 € 2,37 €
2,02 € 20,20 €
1,87 € 935,00 €
1,56 € 1.560,00 €
Bobine complète(s) (commandez en multiples de 1500)
0,917 € 1.375,50 €

Attribut de produit Valeur d'attribut Sélectionner l'attribut
Richtek
Catégorie du produit: CI de pilotes d’éclairage par LED
RoHS:  
4 Output
Boost
10 mA to 40 mA
WQFN-16
24 V
4.2 V
500 kHz to 2 MHz
43 V
- 40 C
+ 85 C
PWM Dimming, Adjustable Switch Frequency, Soft Start, Over Current Protection, Over Voltage Protection, Overtemperature Protection
Reel
Cut Tape
Marque: Richtek
Sensibles à l’humidité: Yes
Style de montage: SMD/SMT
Nombre de canaux: 4 Channel
Type de produit: LED Lighting Drivers
Nombre de pièces de l'usine: 1500
Sous-catégorie: Driver ICs
Raccourcis pour l'article N°: RT8510N-A
Poids de l''unité: 21 mg
Produits trouvés:
Pour consulter des produits similaires, sélectionnez au moins une case.
Sélectionnez au moins une case pour consulter des produits similaires dans cette catégorie.
Attributs sélectionnés: 0

Cette fonctionnalité nécessite l'activation de JavaScript.

TARIC:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.