MP3385BGR-Z

Monolithic Power Systems (MPS)
946-MP3385BGR-Z
MP3385BGR-Z

Fab. :

Description :
CI de pilotes d’éclairage par LED 4-String, 80V Output, WLED Controller with I2C Interface

Modèle de ECAO:
Téléchargez gratuitement le chargeur de bibliothèque pour convertir ce fichier pour votre outil ECAD. En savoir plus sur le modèle ECAD.

Disponibilité

Stock:
Non stocké
Délai usine :
18 Semaines Délai de production estimé en usine.
Minimum : 5000   Multiples : 5000
Prix unitaire:
-,-- €
Ext. Prix:
-,-- €
Tarif est.:
Ce produit est expédié GRATUITEMENT

Prix (EUR)

Qté. Prix unitaire
Ext. Prix
Bobine complète(s) (commandez en multiples de 5000)
0,937 € 4.685,00 €

Autre conditionnement

Fab. Numéro de référence:
Conditionnement:
Reel, Cut Tape
Disponibilité:
En stock
Prix:
2,18 €
Min.:
1

Attribut de produit Valeur d'attribut Sélectionner l'attribut
Monolithic Power Systems (MPS)
Catégorie du produit: CI de pilotes d’éclairage par LED
RoHS:  
1 Output
Buck
QFN-20
33 V
4.5 V
100 kHz to 900 kHz
MP3385B
- 40 C
+ 125 C
Reel
Marque: Monolithic Power Systems (MPS)
Pays d’assemblage: Not Available
Pays de diffusion: Not Available
Pays d'origine: Not Available
Tension d'entrée: 4.5 V to 33 V
Style de montage: SMD/SMT
Nombre de canaux: 1 Channel
Pd - Dissipation d’énergie : 2.97 W
Produit: WLED Controllers
Type de produit: LED Lighting Drivers
Nombre de pièces de l'usine: 5000
Sous-catégorie: Driver ICs
Produits trouvés:
Pour consulter des produits similaires, sélectionnez au moins une case.
Sélectionnez au moins une case pour consulter des produits similaires dans cette catégorie.
Attributs sélectionnés: 0

TARIC:
8542399000

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

MP3385B Step-Up Controllers

Monolithic Power Systems (MPS) MP3385B Step-Up Controllers consist of four regulated LED current channels designed to drive White LED (WLED) arrays. These controllers feature peak current control mode and Pulse-Width Modulation (PWM) control architecture for system loop regulation. The MP3385B controllers support analog, combined analog, Over Current Protection (OCP), Over-Temperature Protection (OTP), Under-Voltage Protection (UVP), and Over Voltage Protection (OVP). These controllers are available in a QFN-20 (4mm x 4mm) package. The MP3385B step-up controllers are ideally used in desktop LCD flat-panel displays, all-in-one PCs, and 2D and 3D LCD TVs.