MP3324GRE-Z

Monolithic Power Systems (MPS)
946-MP3324GRE-Z
MP3324GRE-Z

Fab. :

Description :
CI de pilotes d’éclairage par LED 8-Channel, 100mA/Ch, LED Driver with Se parated PWM/Analog Dimmingand I2C Interface

Modèle de ECAO:
Téléchargez gratuitement le chargeur de bibliothèque pour convertir ce fichier pour votre outil ECAD. En savoir plus sur le modèle ECAD.

Disponibilité

Stock:
Non stocké
Délai usine :
18 Semaines Délai de production estimé en usine.
Minimum : 5000   Multiples : 5000
Prix unitaire:
-,-- €
Ext. Prix:
-,-- €
Tarif est.:
Ce produit est expédié GRATUITEMENT

Prix (EUR)

Qté. Prix unitaire
Ext. Prix
Bobine complète(s) (commandez en multiples de 5000)
0,95 € 4.750,00 €

Autre conditionnement

Fab. Numéro de référence:
Conditionnement:
Reel, Cut Tape
Disponibilité:
En stock
Prix:
2,26 €
Min.:
1

Attribut de produit Valeur d'attribut Sélectionner l'attribut
Monolithic Power Systems (MPS)
Catégorie du produit: CI de pilotes d’éclairage par LED
RoHS:  
1 Output
Buck
QFN-24
16 V
4 V
1 MHz
- 40 C
+ 125 C
Reel
Marque: Monolithic Power Systems (MPS)
Pays d’assemblage: Not Available
Pays de diffusion: Not Available
Pays d'origine: Not Available
Atténuation de lumière: PWM
Style de montage: SMD/SMT
Pd - Dissipation d’énergie : 2.97 W
Type de produit: LED Lighting Drivers
Nombre de pièces de l'usine: 5000
Sous-catégorie: Driver ICs
Produits trouvés:
Pour consulter des produits similaires, sélectionnez au moins une case.
Sélectionnez au moins une case pour consulter des produits similaires dans cette catégorie.
Attributs sélectionnés: 0

TARIC:
8542399000

MP3324 8-Channel White LED Drivers

Monolithic Power Systems (MPS) MP3324 8-Channel White LED (WLED) Drivers operate from 4V to 16V input voltage (VIN) range. These drivers apply eight internal current sources in each LED string terminal. The LED current of each channel is set by an external current-setting resistor, where each channel has a 100mA maximum current. The MP3324 WLED drivers support up to ten ICs cascaded to drive an LED array. These drivers employ separated Pulse Width Modulation (PWM) dimming and analog dimming for each LED channel.                                                                                                     

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.