DIO5718PLT6

DIOO Microcircuits
453-DIO5718PLT6
DIO5718PLT6

Fab. :

Description :
CI de pilotes d’éclairage par LED 28V 2A Synchronous Buck Backlighting Driver, Supports Analog/PWM Dimming

Cycle de vie:
Nouveau produit:
Nouveau chez ce fabricant.
Modèle de ECAO:
Téléchargez gratuitement le chargeur de bibliothèque pour convertir ce fichier pour votre outil ECAD. En savoir plus sur le modèle ECAD.

Disponibilité

Stock:
Non stocké
Minimum : 6000   Multiples : 6000
Prix unitaire:
-,-- €
Ext. Prix:
-,-- €
Tarif est.:
Ce produit est expédié GRATUITEMENT

Prix (EUR)

Qté. Prix unitaire
Ext. Prix
0,243 € 1.458,00 €
0,206 € 2.472,00 €

Attribut de produit Valeur d'attribut Sélectionner l'attribut
DIOO
Catégorie du produit: CI de pilotes d’éclairage par LED
Buck
2 A
DFN-6
28 V
4.5 V
1 MHz
- 40 C
+ 85 C
Marque: DIOO Microcircuits
Pays d’assemblage: Not Available
Pays de diffusion: Not Available
Pays d'origine: Not Available
Atténuation de lumière: PWM
Tension d'entrée: 4.7 V to 28 V
Style de montage: SMD/SMT
Pd - Dissipation d’énergie : 1.39 W
Produit: LED Drivers
Type de produit: LED Lighting Drivers
Nombre de pièces de l'usine: 6000
Sous-catégorie: Driver ICs
Type: Synchronous Buck Backlighting Driver
Produits trouvés:
Pour consulter des produits similaires, sélectionnez au moins une case.
Sélectionnez au moins une case pour consulter des produits similaires dans cette catégorie.
Attributs sélectionnés: 0

TARIC:
8542399000
USHTS:
8542399000

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.